4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi/Jetson Nano Based SIM7600G-H Support LTE CAT4 Global Position


SKU: B0826FSCBV Categoría:



The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to
150Mbps for downlink data transfer. it is pretty low power consumption.

You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like
4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.


  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
  • Supports GPS, BeiDou, Glonass, LBS base station positioning
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
  • Onboard CP2102 USB to UART converter, for serial debugging
  • Breakout UART control pins, to connect with host boards like Arduino/STM32
  • SIM card slot, supports 1.8V/3V SIM card
  • TF card slot for storing data like files, messages, etc.
  • Onboard audio jack and audio decoder for making telephone call
  • 2x LED indicators, easy to monitor the working status
  • Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps)
  • Autobauding baudrate: 9600bps ~ 115200bps
  • Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

    1. SIM7600G-H 4G HAT x1
    2. LTE Antenna x1
    3. GPS External Antenna (B) x1
    4. USB type A plug to micro plug cable x2
    5. RPi screws pack (2pcs) x1


    No hay valoraciones aún.

    Sé el primero en valorar “4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi/Jetson Nano Based SIM7600G-H Support LTE CAT4 Global Position”