x5pcs HC-05 Integrated Bluetooth Module Wireless Serial Port Module 6 pin
This module can be set to a transmitter or a receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can’t communication between, receiver could pairing with computers and cell phone bluetooth. When buying, the default for receiver.
– Module working voltage 3.3 V.
– Potter default rate of 9600, the user can be set up.
– The core module size : 28 mm x 15 mm x 2.35 mm.
– Working current: matching for 30 MA, matching the communication for 8 MA.
– Used for GPS navigation system, water and electricity gas meter reading system.
How to connect to the computer Bluetooth module (from mode)
First to pass through the Bluetooth module power, this time led blinking, open «My bluetooth location», click «Search for devices in range». The system will search for Bluetooth devices, the default device name «linvor» (as modified name was modified name, such as «jiayuanelectron»), double-click or right click and select «Add a Bluetooth device». Enter a passcode (the default is «1234»), Click «Next», if the password is correct, the computer and the pass-through module connection is established, if not previously had a Bluetooth serial devices installed, the system will automatically install the driver and generate a virtual serial port, Click Configuration, select the appropriate COM port, I am here only choose com5, the serial port is connected to the computer after the end of the operation, such as I have here is com5, open the port when the Bluetooth module from the LED will flash into a double flash, then just take the Bluetooth module as is the computer’s serial port to fixed baud rate used in the same, except that it is wireless.
- 1pc x HC-05 Bluetooth Module with Backboard
No hay valoraciones aún.